;

Fall Semester 2020 Catalog

Electrical and Computer Engineering Technology, Associate of Applied Science Degree

Overview

Offered at the Augusta campus

Entrance Dates: Fall, Spring, and Summer
Length of Program: Fall Entrance and Full-time: Six Terms
Spring/Summer Entrance or Part-time: Varies
Credit Hours Required for Graduation: 66

Program Description: The Electrical and Computer Engineering Technology program is a planned sequence of carefully developed college-level courses designed to prepare students to work in the field of engineering technology. The program of study emphasizes the application of scientific methods, and mathematical knowledge in support of engineering practices. Program graduates are qualified as engineering technicians with a specialization in, computer engineering technology, electronics engineering technology, or instrumentation and control engineering technology. High school graduation or GED is required for admission to this program.

Employment Opportunities:The increasing complexity of modern technology has resulted in a rising demand for engineering technicians. Graduates will be qualified to work with engineers and scientists in developing, producing and maintaining technically advanced products and processes. High placement rates, outstanding starting salaries and potential for career advancement are strengths of the program.

 

Graduate Placement Data, Employment Information, Enrollment and Graduation Data is available on the program data page.

 

Program Faculty/Advisors

Surekha Prasad

Phone: (706) 771 - 4140

Email: sprasad@augustatech.edu

Office: Room 822 (Bldg 800)

Augusta Campus

Kim Gaines

Phone: (706) 771 - 4138

Email: kgaines@augustatech.edu

Office: Room 824 (Bldg 800)

Augusta Campus

Curriculum Outline

General Core Courses, 23 credits

ENGL 1101COMPOSITION & RHETORIC

3

MATH 1111COLLEGE ALGEBRA

3

MATH 1113PRECALCULUS

3

PHYS 1111INTRODUCTORY PHYSICS I

3

PHYS 1111LINTRODUCTORY PHYSICS LAB I

1

 

PHYS 1112INTRODUCTORY PHYSICS II

3

PHYS 1112LINTRODUCTORY PHYSICS II LAB

1

OR

CHEM 1211CHEMISTRY I

3

CHEM 1211LCHEMISTRY I LAB

1

OR

CHEM 1151SURVEY OF INORGANIC CHEMISTRY

3

CHEM 1151LSURVEY OF INORGANIC CHEM LAB

1

 

XXXX XXXX
Social/Behavioral Sciences Elective

3

XXXX XXXX
Humanities/Fine Arts Elective

3

Fundamental Occupational Courses, 18 credits

ENGT 1000Intro to Engineering Tech

3

ECET 1101CIRCUIT ANALYSIS I

4

ECET 2101CIRCUIT ANALYSIS II

4

ECET 1191COMPUTER PROGRAMMING FUND

3

ECET 1110Digital Systems I

4

ECET 1101, ECET 2101, ECET 1110: See *note below

AND

(Students must choose one of the following areas of specialization)

Computer Engineering Technology Specialization Courses, 25 credits

CIST 1122HARDWARE INSTALL & MAINT

4

ECET 2120ELECTRONIC CIRCUITS I

4

ECET 2110DIGITAL SYSTEMS II

4

CIST 2451INTRO TO NETWORKS - CISCO

4

CIST 2452Cisco Routing&Switching Essent

4

ENGT 2300CAPSTONE PROJECT

1

XXXX XXXX
Occupational Electives

4

ECET 2120, ECET 2110: See *note below

OR

Electronics Engineering Technology Specialization Courses, 25 credits

ECET 2120ELECTRONIC CIRCUITS I

4

ECET 2220ELECTRONIC CIRCUITS II

4

ECET 2110DIGITAL SYSTEMS II

4

ICET 2010ELECTROMECHANICAL DEVICES

4

CIST 2451INTRO TO NETWORKS - CISCO

4

ENGT 2300CAPSTONE PROJECT

1

XXXX XXXX
Occupational Electives

4

ECET 2120, ECET 2220, ECET 2110: See *note below

OR

Instrumentation and Control Specialization Courses, 25 credits

ECET 2120ELECTRONIC CIRCUITS I

4

ICET 2010ELECTROMECHANICAL DEVICES

4

ICET 2020INSTRUMENTATION & PROCESS MEAS

4

ICET 2030PROGRAMMABLE LOGIC CONTROLS

4

ICET 2050PROCESS CONTROL

4

ENGT 2300CAPSTONE PROJECT

1

XXXX XXXX
Occupational Electives

4

ECET 2120: See *note below

Notes:

  • A grade of “B” or higher is required in MATH 1111. A grade of “C: or higher is required for all other courses in the curriculum.
  • ECET courses identified with an asterisk (*) have split course equivalents with flexible options for lecture & lab. Contact program advisors for additional details.
  • All occupational electives must be approved by a program advisor. Occupational courses taken in a program that is not ABET accredited will not transfer to the Electrical and Computer Engineering Technology Program, unless approved by a program advisor.
  • The Electrical and Computer Engineering Technology program is accredited by the Engineering Technology Accreditation Commission of ABET, http://www.abet.org.

Guided Pathway

You may click on any course below to view the course description and prerequisite information.

Students who do not follow the Course Sequence listed below may not be able to complete the program in the number of semesters shown.

All students MUST meet with a program advisor each term for advisement. The sequence of recommended courses shown below applies to students starting in the Fall term. Students starting in the Spring and Summer terms should meet with a program advisor for course recommendations. Part-time students or students who wish to take classes in the evening/night should meet with a program advisor for course recommendations.

Year 1 Fall Semester

MATH 1111COLLEGE ALGEBRA

3

ENGT 1000Intro to Engineering Tech

3

ENGL 1101COMPOSITION & RHETORIC

3

XXXX XXXX
Social/Behavioral Sciences Elective

3

MATH 1111 & ENGT 1000 are critical prerequisites. Part-time students are advised to prioritize enrolling in these.

Year 1 Spring Semester

MATH 1113PRECALCULUS

3

ECET 1101CIRCUIT ANALYSIS I

4

ECET 1191COMPUTER PROGRAMMING FUND

3

XXXX XXXX
Humanities/Fine Arts Elective

3

Year 1 Summer Semester

ECET 2101CIRCUIT ANALYSIS II

4

MATH 1131CALCULUS I

4

OR

DFTG 2010Engineering Graphics

4

OR

XXXX XXX
Advisor Approved Technical Elective

4

Students MUST choose at least one area of specialization.

Year 2 Fall Semester

Computer Engineering Technology Specialization

ECET 1110Digital Systems I

4

ECET 2120ELECTRONIC CIRCUITS I

4

CIST 1122HARDWARE INSTALL & MAINT

4

PHYS 1111INTRODUCTORY PHYSICS I

3

PHYS 1111LINTRODUCTORY PHYSICS LAB I

1

OR

Electronics Engineering Technology Specialization

ECET 1110Digital Systems I

4

ECET 2120ELECTRONIC CIRCUITS I

4

ICET 2010ELECTROMECHANICAL DEVICES

4

PHYS 1111INTRODUCTORY PHYSICS I

3

PHYS 1111LINTRODUCTORY PHYSICS LAB I

1

OR

Instrumentation and Control Engineering Technology Specialization

ECET 1110Digital Systems I

4

ECET 2120ELECTRONIC CIRCUITS I

4

ICET 2010ELECTROMECHANICAL DEVICES

4

PHYS 1111INTRODUCTORY PHYSICS I

3

PHYS 1111LINTRODUCTORY PHYSICS LAB I

1

Year 2 Spring Semester

Computer Engineering Technology Specialization

CIST 2451INTRO TO NETWORKS - CISCO

4

ECET 2110DIGITAL SYSTEMS II

4

PHYS 1112INTRODUCTORY PHYSICS II

3

PHYS 1112LINTRODUCTORY PHYSICS II LAB

1

OR

CHEM 1211CHEMISTRY I

3

CHEM 1211LCHEMISTRY I LAB

1

OR

CHEM 1151SURVEY OF INORGANIC CHEMISTRY

3

CHEM 1151LSURVEY OF INORGANIC CHEM LAB

1

OR

Electronics Engineering Technology Specialization

CIST 2451INTRO TO NETWORKS - CISCO

4

ECET 2110DIGITAL SYSTEMS II

4

PHYS 1112INTRODUCTORY PHYSICS II

3

PHYS 1112LINTRODUCTORY PHYSICS II LAB

1

OR

CHEM 1211CHEMISTRY I

3

CHEM 1211LCHEMISTRY I LAB

1

OR

CHEM 1151SURVEY OF INORGANIC CHEMISTRY

3

CHEM 1151LSURVEY OF INORGANIC CHEM LAB

1

OR

Instrumentation and Control Engineering Technology Specialization

ICET 2020INSTRUMENTATION & PROCESS MEAS

4

ICET 2030PROGRAMMABLE LOGIC CONTROLS

4

PHYS 1112INTRODUCTORY PHYSICS II

3

PHYS 1112LINTRODUCTORY PHYSICS II LAB

1

OR

CHEM 1211CHEMISTRY I

3

CHEM 1211LCHEMISTRY I LAB

1

OR

CHEM 1151SURVEY OF INORGANIC CHEMISTRY

3

CHEM 1151LSURVEY OF INORGANIC CHEM LAB

1

Year 2 Summer Semester

Computer Engineering Technology Specialization

CIST 2452Cisco Routing&Switching Essent

4

ENGT 2300CAPSTONE PROJECT

1

OR

Electronics Engineering Technology Specialization

CIST 2452Cisco Routing&Switching Essent

4

ENGT 2300CAPSTONE PROJECT

1

OR

Instrumentation and Control Engineering Technology Specializatin

ICET 2050PROCESS CONTROL

4

ENGT 2300CAPSTONE PROJECT

1

A grade of “B” or higher is required for MATH 1111. A grade of “C” or higher is required for all other courses.

Accreditation

The Electrical and Computer Engineering Technology program is accredited by the Engineering Technology Accreditation Commission on ABET, http://www.abet.org.

The program faculty and constituencies have established program educational objectives consistent with the institutional mission; and student outcomes to assess the effectiveness of the program.

 

Program Educational Objectives: Program educational objectives are broad statements that are used to describe career and professional accomplishments that the Electrical and Computer Engineering Technology program is preparing graduates to achieve during the first few years of graduation. The objectives are broad, but imply employment in the area served by Augusta Technical College, as an engineering technician or technologist at the two-year associate degree level. This is consistent with the mission of the college.

Graduates of the program will:

  • Be successfully employed in their field of study
  • Possess satisfactory technical skills appropriate to their discipline.
  • Possess a comprehensive an understanding of work place ethics at a satisfactory level.

 

Student Outcomes: Student outcomes are statements that describe what units of knowledge or skill students are expected to acquire from the program's courses to achieve the ECET program's educational objectives.

Each student of the Electrical and Computer Engineering Technology program will demonstrate the following attributes:

  • An ability to apply knowledge, techniques, skills and modern tools of mathematics, science, engineering, and technology to solve well-defined engineering problems appropriate to their discipline;
  • An ability to design solutions for well-defined technical problems and assist with the engineering design of systems and components and processes appropriate to the discipline;
  • An ability to apply written, oral and graphical communication in well-defined technical and non-technical environments; and an ability to identify and use appropriate literature;
  • An ability to conduct standard tests, measurements, and experiments and to analyze and interpret the results; and 
  • An ability to function effectively as a member of a technical team.