Program Information
BS Degree - Code 633300 - Catalog 2022/2023
Ronald Eaglin, Chair, School of Engineering, 386-506-4176, Ronald.Eaglin@daytonastate.edu
Rileigh Gherlone, Administrative Assistant, 386-506-4138, Rileigh.Gherlone@daytonastate.edu
Information email: bset@daytonastate.edu
Program Mission, Description, and Outcomes
Mission:
To prepare students for successful employment in the field of Engineering Technology and Electronics through quality education and advisement.
Description:
The program prepares graduates for technical positions in the expanding fields of electrical, digital, computers and microprocessors. The primary objective is to provide a broad foundation of theoretical and practical knowledge in the areas of electrical and electronics circuits, digital circuits, computers, power systems, programmable logic controllers, microprocessors, and control systems.
The program uses a 2 + 2 model requiring the completion of an associates degree for entry into the program. The degree components are below.
Program Educational Objectives:
The educational objectives of the BSET program are as follows.
-
Career: Graduates will use their broad understanding of the key principles and practices of engineering technology, the written and oral communications skills, and the ability to work with others to apply these skills and knowledge to the design, implementation, and maintenance of systems.
-
Skills: Graduates will contribute to their profession using the mathematical and scientific concepts that underlie engineering technology applications, will apply this understanding, and acquire new skills and knowledge necessary to analyze technology problems and develop suitable solutions.
-
Professionalism and Ethics: Graduates will understand the ethical, human, and social issues of their field and will be involved members of their local and global communities acting as responsible technical professionals.
-
Life-Long Learning: Graduates will be active contributors to their employer and their profession with a strong commitment to continuous individual and organizational improvement, effective communication, teamwork, quality, timeliness, and continued professional development.
Program Outcomes:
Graduates of the program will be able to:
-
Apply knowledge, techniques, skills and modern tools of mathematics, science, engineering, and technology to solve broadly-defined engineering problems appropriate to the discipline;
-
Design systems, components, or processes meeting specified needs for broadly-defined engineering problems appropriate to the discipline;
-
Apply written, oral, and graphical communication in broadly-defined technical and non-technical environments; and an ability to identify and use appropriate technical literature;
-
Conduct standard tests, measurements, and experiments and to analyze and interpret the results to improve processes; and
-
Function effectively as a member as well as a leader on technical teams.
Program Competencies
The program prepares graduates to have competence in the following curricular areas:
-
the application of circuit analysis and design, computer programming, associated software, analog and digital electronics, and microcomputers, and engineering standards to the building, testing, operation, and maintenance of electrical/electronic(s) systems;
-
the application of natural sciences and mathematics at or above the level of algebra and trigonometry to the building, testing, operation, and maintenance of electrical/electronic systems;
-
the ability to analyze, design, and implement one or more of the following: control systems, instrumentation systems, communications systems, computer systems, or power systems;
-
the ability to apply project management techniques to electrical/electronic(s) systems; and
-
the ability to utilize differential and integral calculus, as a minimum, to characterize the performance of electrical/electronic systems.
Financial Aid
This program is eligible for federal financial aid and state Bright Futures Scholarship Program.
Financing Options: All students are encouraged to apply for federal and state student financial assistance by completing their FAFSA at studentaid.gov/h/apply-for-aid/fafsa. For more information on grants, loans and work programs available see the Office of Financial Aid webpage at daytonastate.edu/financial-aid/. Students are also encouraged to apply for one of the many Daytona State College Foundation scholarships offered each semester. For more information see: daytonastate.edu/scholarships/.
Additional Admission Requirements
-
Students must submit a separate application for admissions to the upper two years of this program.
-
Applicants for the program must have earned an Associate of Science (AS), an Associate of Applied Science (AAS), an Associate of Arts (AA) degree, or previous Bachelor of Science (BS) with an overall grade point average of 2.5.
-
Students with a grade point average between 2.0 and 2.49 may be admitted conditionally. AA graduates may be admitted to the program with the approval of the Chair of the program.
-
Applicants who have not earned an associate degree may be admitted to the program if they have earned at least 60 transferable college level credits with a grade of "C" or better in all core courses. Applicants in this category must otherwise meet all other requirements for admission which will be granted by approval of the Chair. Students gaining admission through greater than 60 hours must have completed a class in College Algebra (MAC1105) or equivalent with a grade of C or better for admission.
-
Students should take the engineering technology applied mathematics sequence which consists of EGN2045 (Engineering and Technology Calculus I, 4 hours) and EGN3046 (Engineering and Technology Calculus II, 3 hours). Students may take MAC2311C or EGN2045 as a prerequisite for EGN3046.
-
Students intending to continue to a graduate program in Engineering or other technical majors may alternatively take the engineering math sequence which consists of MAC1140, MAC2311C, MAC2312C, and MAP2302C. The prerequisite math classes for this sequence are MAC1114 and MAC1105.
-
Students may use MAP2302C (Differential Equations and Lab) to substitute for the program-required course EGN3046 (Engineering and Technology Calculus II). Students must still complete 48 hours of upper-level course work and should seek advising to determine suitable upper level courses.
-
Technical courses not offered by Daytona State College may be substituted to fulfill requirements at the approval of the department chair. Course syllabi must be submitted to the department for consideration.
- Senior Design courses (ETI4448 and ETG4950C) must be completed at Daytona State College.
Additional Completion Requirements
- Prior to graduation, students must complete: a) at least 48 hours of approved upper level technical courses, b) 36 hours of general education course work and, c) 44 hours of approved lower level technical course work.
- Students must have completed two years of the same foreign language in high school or two semesters of the same college level foreign language to graduate.
- Specific to the graduation requirements of the program, students must complete a course in C language based Computer Programming (EGN3214, COP2001, COP2220, COP2800, COP2360 or equivalent). EGN3214 may be used as an upper-level technical elective.
- Students must complete the State mandated 36 hours of general education core prior to graduation: Communications - 9 hrs; Mathematics - 6 hrs; Natural Sciences - 6 hrs; Humanities - 6 hrs; Social Sciences - 6 hrs and an additional three (3) hours from any of the five categories.
Careers
The occupational outlook for engineering technology is available at https://www.bls.gov/ooh/field-of-degree/engineering-technologies/engineering-technologies-field-of-degree.htm Students considering careers in engineering technology should read the information on types of jobs available and salary ranges.
Note: It’s never too early to prepare for your career! Login to your Daytona State Career Services Student Job Board and create your personal account to submit your resume for review and search for jobs, and practice your interview skills with Big Interview. For questions, please email Career Services to connect with a Career Advisor.
Program Credit Requirements
|
Technical Electives (Lower or Upper Level) |
44.00 |
|
General Education Requirements |
36.00 |
|
BSET- Electrical Systems Program Specific Courses |
48.00 |
| TOTAL |
... |
128.00 |
Note: Prior to enrollment in college-level English or math courses, some students may be advised to complete college preparatory/developmental course work. See an Academic Advisor to determine developmental course requirements.
Program Specific Courses
Concentration Required Courses
Select One: Technical Writing
Students who have taken ENC2210 can use that course to fulfill this requirement. Such students will need to take an additional 3 hours of upper-level technical elective to meet the 48 hours of upper level requirement. New students should take GEB3213 to avoid taking excess hours.
Program Elective Course (3 credits)
Choose One Course
| CEN4010 | Software Engineering | 3 |
| CET4138C | Programmable Digital Devices and Lab | 3 |
| CDA4101 | Computer Organization and Design | 3 |
| COP4610 | Operating Systems | 3 |
| COP4708 | Applied Database I | 3 |
| EET4329C | Communications Systems and Lab | 4 |
| ETM4331 | Applied Fluid Mechanics | 3 |
| ETM4220 | Energy Systems | 3 |
| ETI4704 | Occupational Safety | 3 |
| EGN3046 | Engineering and Technology Calculus II | 3 |
| EGN3373 | Principles of Electrical Engineering | 3 |
| EGN3343 | Thermodynamics | 3 |
| EGN3214 | Programming for Engineers | 3 |
| ETG3907 | Directed Study in Industrial Systems | 3 |
| Approved Technical Elective | 3 |
Sample Program of Study
Year 1
1st Semester
| EGN2045 | Engineering and Technology Calculus I | 4 |
| OR | |
| MAC2311C | Calculus I and Lab | 4 |
| | |
| GEB3213 | Business Writing | 3 |
| CET3198 | Digital Systems | 2 |
| CET3198L | Digital Systems Lab | 1 |
| COP1000 | Principles of Computer Programming | 3 |
| General Education or Technical Elective | 3 |
| Total Credit Hours: | 16 |
2nd Semester
| EGN3046 | Engineering and Technology Calculus II | 3 |
| ETI3116 | Engineering Quality Assurance | 3 |
| EGN3613 | Engineering Economics Analysis | 3 |
| ETS3543C | Programmable Logic Applications and Device and Lab | 3 |
| General Education or Lower Level Elective | 3 |
| Total Credit Hours: | 15 |
Summer Semester
| General Education or Lower Level Elective | 3 |
| Upper Level Elective | 4 |
| Total Credit Hours: | 7 |
Year 2
1st Semester
2nd Semester
| EGN3321 | Dynamics | 3 |
| ETG4950C | Project Management and Senior Design II and Lab | 3 |
| EET4158 | Linear Integrated Circuits | 3 |
| EET4158L | Linear Integrated Circuits Lab | 1 |
| EET4732 | Feedback Control Systems | 3 |
| EET4732L | Feedback Control Systems Lab | 1 |
| Total Credit Hours: | 14 |
Students are strongly encouraged to seek advisement prior to enrolling in courses.
Note: Sequence of courses may vary. Check catalog course descriptions for requisite requirements.
Total Credit Hours: 68